A Hit on
Elite Assembly Support
1) Attaching the Top Housing to the Litter Pans
2) Attaching plugs on the
waste compartment lid.
3)
1) Attaching the top housing (white part) to the litter pan
CORRECTLY ASSEMBLED
Please note that the edge of the blue litter tray
is not covered by the white crossbar.
The white crossbar is over the blue litter pan.
To correctly assemble, insert the white crossbar
under the edge of the litter pan first then swing the other end of the main assembly (white part) down.
2)
ELITE PLUG INSTALLATION
Plug
Hole on the LitterMaid
Plug in place.
Plug in place. Viewed from the bottom.
Red arrow shows the cut part of plug that is locked under the rim of the LitterMaid. The plug is not properly inserted if this is not the case.
3)